Icon Vehicle Dynamics 3" Suspension System - Lift Components Only - 2007-2018 Jeep JK

  • $684.45

Overview:

The ICON Vehicle Dynamics 3" Lift Suspension Components are designed for Jeep JK owner's demanding the ultimate in performance and ride quality, without the larger stance you find in bigger lift systems on today's market. Our ICON Jeep Wrangler Jk 3" lift system components are engineered with front and rear dual rate progressive wound springs which is the foundation for on and off road performance and suspension articulation. The dual rate design gives you a softer initial rate for superb on road comfort and a firmer than stock secondary rate that increases during compression for excellent bottom out control. The 3" Jk Box kit includes front and rear billet bump stop spacers with extended front sway bar end links. Front and Rear Shock extension are required for proper use of this kit, or we also offer our V.S. 2.0 Aluminum Smooth Body or Remote Reservoir shocks which are your best option for performance, suspension handling / ride quality. Our ICON 3" JK lift system is designed for clearance of 33" tall tires (35" tall with installation of aftermarket fenders).


Key Features:

• Dual Rate Coil Springs Front and Rear

• Adds 30% More Wheel Travel over Stock w/ ICON shocks installed

• No Welding or Cutting

• Vehicle can be Returned Back to Stock

• Level Stance Front to Rear

• Out Articulates Most Long Arm Kits of Comparable Height

• Made in the USA

• Lifetime Guarantee that Coil Springs Won’t Sag

 

Tech Info:

• REQUIRES shock extensions for stock shocks or ICON V.S. 2.0 Aluminum Series Shocks for proper use

• Fits 2007-2018 Jeep Wrangler JK Models 4wd applications 

• 2 Door Models sit 1/2" - 3/4" taller than 4 door models but still level

• 2012-UP models require exhaust extension kit (Part # 22011) for Proper Front Driveline Clearance

• No driveline modifications necessary if kit is installed as intended (with or without track bars)

• For optimized axle centering add the ICON front and rear Jeep JK adjustable track bars

• Front End Alignment Required

 

Wheel & Tire Fitment Info:

OEM Wheels & Tires:    Yes

AfterMarket Wheels:    4.5" Backspace

(wheel spacers required to run factory wheels with an over sized tire)

Aftermarket Tires:     33" tall x 12.50"

(Larger 35" tire packages will fit with minor modifications or aftermarket high clearance fenders, test fitment recommended)

 

System Components Included:

22500 - 2007 - Current Jeep JK - 3" Suspension Lift Components Only (No Shocks)

22010  (QTY - 1) |Jeep JK 3" Front Dual Rate Spring Kit (Pair)

22015  (QTY - 1) | Jeep JK 2" Rear Dual Rate Spring Kit (Pair)

22040  (QTY - 1) | Jeep JK 3" Lift Box Kit (front and rear billet bump stops / front sway bar links / hardware)

    California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

    California Residents: CARB WARNING: OffroadAlliance.com will not ship any products that are not CARB approved to California. This only affects CARB related products such that affect car performance and emissions where CARB approval is required.

    Snap Finance - Apply Here

    We Also Recommend

    ★ Our Reviews

    Let customers speak for us

    1189 reviews
    95%
    (1127)
    4%
    (53)
    1%
    (8)
    0%
    (1)
    0%
    (0)
    Nice and cool

    Bought the 180* thermostat for my ‘17 Ford Raptor because I was seeing coolant temps up to 240* and got a check engine light do to the original thermostat. This thermostat keeps the coolant below 200* when cruising in the city and going up hills.

    Easy Install

    Great instructions easy install. Much easier than my old alternative off-road mounts

    Great Buy!

    The lights are amazing! I went with the amber drl and it matches just right. The instructions on the other hand, not so great. gives you basic detail but you can find yourself in a mess. I took about 4 hours alone to adjust the lights and wire.

    Awesome

    DIY dream, this thing was easy to install in my 2021 truck and in minutes, sweet

    Excellent kit, but need updating for 2020+ Raptors

    I looked at a lot of Ford Raptor bumper light kit options and always came back to this one due to the finished look of the triple bezel. I ordered the kit with Baja Designs S1 corners since I had already purchased Baja Squadron Sport squares for the other two pairs. Build quality of the kit is top notch. Instructions were adequate when used in conjunction with the installation video on the website; however, my booklet was out of date (did not contain the correct upfitter switch wire guide for 2020+ models) and my hardware kit needed supplementation because for some reason my Raptor required nearly twice as many spacer to set the lights at the correct height to fit in the bezel housing. No matter - I contacted ORA (on a weekend no less) and soon had the kit developer on the line to go through the installation process. When it was apparent I needed more hardware, he sent me another set which worked out great. Install complete and loving the OEM appearance of my new lights!

    Customers rate us 4.9/5 based on 1189 reviews.