null
SwarfWorks
Machined in Michigan. Built for Ford Trucks.

SwarfWorks — Precision-Machined Mounts for Raptor, F-150 & Super Duty

Third brake light housings, Elite bumper light mounts, hidden winch mounts and trailing arm guards — the parts that make a build look like it left the factory that way.

Why Shop SwarfWorks at Offroad Alliance
Machined, Not Bent CNC work, 3D-scanned fitment, stainless hardware and factory-matched finishes. These parts look like equipment, not brackets.
Bolts to Factory Points No drilling your roof, no hacking your bed. Threaded backer plates replace the flimsy factory nuts, and the truck goes back to stock if you want it to.
Every Option on the Page Harnesses, light pods, antenna and Starlink options, camera adapters. The configuration is laid out so you can order the whole thing in one go.
Veteran-Owned & Proud A veteran-owned company built on service, trust, and real support for the off-road and truck community.

SwarfWorks builds for one kind of truck and overbuilds everything it makes. These are the parts you spot on somebody else’s rig and immediately go looking for — machined, finished and fitted like Ford put them there.

A GMRS antenna that went on without drilling your roof. Four LP9s sitting dead level in the bumper, in a mount painted to match it. A winch hidden behind the grille. These are the details that separate a finished rig from an almost-finished one — and nobody does them better for a Ford.

Everything here bolts to factory mounting points and comes back off if you ever sell the truck. Find your Raptor, F-150, Tremor or Super Duty below and finish the build.

Why Shop SwarfWorks at Offroad Alliance
Machined, Not Bent CNC work, 3D-scanned fitment, stainless hardware and factory-matched finishes. These parts look like equipment, not brackets.
Bolts to Factory Points No drilling your roof, no hacking your bed. Threaded backer plates replace the flimsy factory nuts, and the truck goes back to stock if you want it to.
Every Option on the Page Harnesses, light pods, antenna and Starlink options, camera adapters. The configuration is laid out so you can order the whole thing in one go.
Veteran-Owned & Proud A veteran-owned company built on service, trust, and real support for the off-road and truck community.
Third Brake Lights

The SwarfWorks 3rd Brake Light: One Spot, Everything You Want On It

This is the part SwarfWorks is known for, and it is not a bracket — it is a complete replacement housing with its own LEDs and circuit board that takes over your factory brake light.

From there it carries up to three Baja Designs pods, a GMRS or VHF antenna, a Starlink Mini, and your factory cargo camera, all from the one spot on your truck that is already high, already centered, already sealed and already wired.

The back profile is machined from a 3D scan of your cab, so it sits flush. The red LEDs are 11mm 3W and user-replaceable. The light hardware is hidden inside the housing. Pick your options and it ships configured.

Light Mounts

Elite Light Mounts: Four LP9s, Dead Level, Factory Gray

If you are putting serious money into Baja Designs lights, this is where they belong. The Elite mounts carry up to four LP9s plus a pair of LP4s or XL80s, built from 0.120-inch DOM tube and sheet with quarter-inch brackets and stainless turnbuckles.

Then comes the part nobody else bothers with: the whole thing is e-coated inside and out, powder coated in a metallic gray matched to factory Raptor bumpers and flares, and finished with a matte clear coat so the sheen matches too.

Generation-specific mounts for Gen 2, Gen 3 and the 2024-and-up Raptor and Tremor.

Premium Upgrades

Hidden Winch Mounts, Trailing Arm Guards & the Rest of the Details

The hidden front winch mount puts a full-size winch behind the grille on a Raptor, F-150 or Tremor — 5/16-inch steel, standard 10 by 4.5 inch bolt pattern, with a slot for auxiliary lights.

There is a hidden rear mount too, because getting pulled out backward beats turning around on a shelf road. The rear trailing arm guards take the hits your Gen 3 arms otherwise take, in matte black or Ford Code Orange.

Then the small stuff that quietly makes a truck better: shock guards, license plate relocations that clean up the front end, Switch-Pros mounting kits, and antenna and Starlink mounts.

3rd Brake Light Mount Guide

What You Can Run on a 3rd Brake Light Mount

The top center of your cab is the best real estate on the truck: the highest point, dead center, facing back, with structure behind it, a sealed hole already through the roof line, and 12 volts already there. SwarfWorks is the only part that uses all of it at once. Here is what people put up there.

Comparison of common accessories mounted on a SwarfWorks third brake light housing
What You Mount Why It Goes There What It Replaces
01 Rear-Facing Dust or Work Lights Bed / Camp Lighting Cab height clears the bed rails and tailgate, so it actually lights the bed, the hitch and the campsite instead of grazing them. Bedside or tailgate lights that sit too low.
03 GMRS, VHF or CB Antenna Communications Height and a grounded metal base, which is exactly what an antenna wants — using a hole that is already there and already sealed. Drilling a permanent hole in your roof, or a magnet mount that scratches paint and leaves at highway speed.
04 Starlink Mini Connectivity Clear sky view, out of the way, wired through the cab instead of a cable through the window. A dish bungeed to the bed rack.
05 Cargo Camera Factory Integration Keeps the factory camera and its view, or adds one. Losing the camera when you change the housing.
06 Dune or Whip Flag High / Centered High, centered, and backed by actual structure. A bed-rail clamp that bends.

The short version: a chase rack does some of this for $700 to $2,000 and costs you the bed. Drilling the roof does one of it and costs you the resale. One machined housing does all of it, bolts to holes that already exist, and comes back off.

Not sure which version fits your truck? Call or text 888-466-8991 and we will talk it through.
Shop All SwarfWorks

Why Buy Your SwarfWorks From Offroad Alliance

Configured Right the First Time Harness, light pods, antenna, camera adapter. The options are laid out so your order arrives complete.
People Who Run These Trucks Call, text or chat with someone who has installed this stuff and will happily talk through what your build needs.
Free Shipping Over $399 Which most of this clears on its own.
Veteran-Owned & Proud A veteran-owned company built on service, trust, and real support for the off-road and truck community.