ICON 2.5" Lift, Stage 4 Suspension System for 20+ Gladiator - K22104

ICON 2.5" Lift, Stage 4 Suspension System for 20+ Gladiator - K22104

The Stage 4 ICON 2.5 in. Suspension System for the Jeep Gladiator is the ideal setup for drastically improving on-road ride quality and overall performance for the daily driven application that will see frequent, moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5 in. lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35 in. tire. For those looking to run a 37 in. tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).

Features

• 2.5 in. lift height
• Fits 35 in. tires (37 in. with extended bump stop spacer kit)
• 33% front, 23% rear increase in wheel travel
• Improves on and off-road ride quality over stock
• Front lower links included for caster angle correction and improved front end articulation
• Dual rate front coil springs with lifetime guarantee against sagging/breakage
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• 2.0 Aluminum Series shocks with vehicle specific valving
• Front and rear track bars ensure proper alignment and improved articulation
• Adjustable, billet aluminum front sway bar links
• 100% bolt-on system makes for an easy install
• "ICON 1K" tested under rigorous off-road conditions to validate tune, performance, strength, and durability

Technical Notes

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: ICON Alloys - 17 x 8.5 in. w/ 4.5 in. Backspace / -6 mm Offset
• Recommended Aftermarket Wheels: ICON Alloys - 18 x 9 in. w/ 4.5 in. Backspace / -12 mm Offset
• Recommended Aftermarket Tires: 35 x 12.50 in. (37 x 12.50 in. with optional bump stop spacer kit PN: 22071)
• APPLICATION NOTE #127: Will Not Fit Gladiator Mojave Trim
• APPLICATION NOTE #150: Shocks Are Fully Serviceable
• ICON's advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
• Diesel models will net approx. 1.75 in. of front lift over stock due to their heavier weight.
• Ships In Multiple Boxes

System Components

• 22021 (qty: 1) | 18-23 JL/20-23 JT FRONT FIXED LOWER LINK KIT
• 22025 (qty: 1) | 18-23 JL 2.5 in./20-23 JT 2 in. FRONT DUAL RATE SPRING KIT
• 22066 (qty: 1) | 20-UP JT 1.5 in. REAR MULTI RATE SPRING KIT
• 22061 (qty: 1) | 18-UP JL/20-UP JT FRONT SWAY BAR LINK KIT
• 22062 (qty: 1) | 20-UP JT REAR SWAY BAR RELOCATION KIT
• 22027 (qty: 1) | 18-UP JL/20-UP JT FRONT ADJ TRACK BAR KIT
• 22068 (qty: 1) | 20-23 JEEP JT/19-23 RAM 1500 REAR ADJ TRACK BAR KIT
• 26523 (qty: 2) | 18-UP JL/20-UP JT 2.5 in. FRONT 2.0 VS IR
• 26527 (qty: 2) | 20-UP JT 2.5 in. REAR 2.0 VS IR