Fabtech Ball Joint Control Arm Lift System, 3 in. Lift w/ Front Dirt Logic 2.5 Coilover And Rear Dirt Logic 2.25 Shocks - K3170DL

Fabtech Ball Joint Control Arm Lift System, 3 in. Lift - K3170DL

This 3in Ram lift kit has been designed to provide a superior ride quality with clearance to run 35in tires for both on and offroad use. The mild lift height is subtle yet gives the vehicle a commanding stance without over doing it. Fabtech engineers took considerable time to cycle and test the 3in lift with their heavy duty ball joint upper control arms. There is no bind throughout the suspension travel and steering operation. The steering will go full lock to lock without any loss of the turning radius. The factory Ram upper control arm is made of plastic with a light duty ball joint. Fabtech's Upper Control Arms are constructed of tubular steel with large robust ball joints that provide strength to the suspension. These Fabtech upper control arms are a substantial upgrade for aggressive offroad use. Dirt Logic 2.50 Coilover shocks replace the factory shocks for 3in of lift with outstanding damping capacity for offroad use. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. The rear suspension receives a coil spring spacer to lift the vehicle. This helps keep the vehicle's factory stance without effecting the ride quality. This Ram lift kit comes with Dirt Logic 2.25 rear shocks. They will provide a superior ride quality both on and offroad with excellent damping for offroad use. This high quality 3in Ram lift kit is easy to install and will provide years of service while adding strength and reliability to the vehicle.

Features:

• Simplified Design With Fast Install
• Steering Knuckles Retain Proper ESC
• No Loss Of Ground Clearance
• 2 to 3 Hours Installation
• No Drilling Required
• No Welding Required
• No Cutting Required
• No Driveshaft Modification