Foutz HOSS 3.0 Rear Lift Collars: 21+ Bronco

21+ Bronco HOSS 3.0 Rear Spring Collar Lift Kit

Designed for the Bronco's High-Performance Off-Road Stability Suspension system package, these NEW Spring Collars are the best way to add more ride height to the front and rear while retaining the stock Fox HOSS 3.0 shock package.

Key Features

• You Can Customize Your Lifted Look: Mix and match your lift collar sizes with 1", 1.5", 2" or 2.5" to get the front and rear height to be exactly what you want it to be. The amount of lift is measured at the wheel so pick the height you want to gain front and back and select the size from the options.


• Designed by a Team of Suspension System Specialists: We put in the hours and hard work to construct a proper under spring spacer that mounts to the shock body under the spring perch so it can add extra preload to the stock spring.


• We don't use a cheesy block on top of the shock mount, here's why: It will move the whole shock down and that lets the suspension droop farther then it was intended. This causes premature failures because it puts a bind on the ball joints and CV joints resulting in damage to occur.


• Race Proven Engineering: We have an incredible amount of experience & knowledge when it comes to stock suspension from our Raptor R race programs and racing our stock full Ford Super Duty race trucks over the years. Foutz Motorsports has been making suspension great since '98, that's why we want you to cash in on our experience with the best HOSS 3.0 lift collar kit on the market.

PLEASE READ THE FOLLOWING INSTALL REQUIREMENTS & RECOMMENDATIONS FOR THIS KIT

***BEFORE INSTALL***

This kit should be installed by a professional that has the correct tools to compress the front spring without risking injury or damage to your Bronco. Compressing a spring can be dangerous if not done correctly.

***AFTER INSTALL***

It is highly recommended that your truck gets an alignment after installing these lift collars to ensure you don't end up with poor tire wear in the front.