null
Offroad alliance SNAP Finance banner.

TeraFlex Jeep JL/JLU JK/JKU Delta Brake Kit Front & Rear 5x5 in. Bolt Pattern - 4403450

TeraFlex

$2,553.99
SKU:
4403450

UNIVERSAL OR MULTI-VEHICLE FITMENT

Review description to confirm additional fitment details

Offroad alliance SNAP Finance banner.

TeraFlex Jeep JL/JLU JK/JKU: Delta Brake Kit Front & Rear 5x5in. Bolt Pattern - 4403450

The TeraFlex Delta Brake System is the ultimate upgrade for JL and JK Wrangler/Unlimited and JT Gladiator models with oversized and heavier wheels/tire combos requiring increased braking performance. A must for 33-42 inch tires or heavy-laden overland rigs. Includes all the components required to upgrade both front and rear axles.


Delta Brake Calipers feature a high-modulus bridge. Modulus measures a material's resistance to elastic (recoverable) deformation under load. A stiff material has a high modulus, which means it only changes shape slightly under high elastic loads before returning to its normal shape.

Fits:



  • JL Wrangler (2-door)

  • JL Wrangler Unlimited (4-door)

  • JK Wrangler (2-door)

  • JT Gladiator (pickup)

  • JK Wrangler Unlimited (4-door)


Specs:



  • Minimum Wheel Diameter: 17 inch

  • Back Spacing: 4.75 inch or less

  • Bolt Pattern: 5x5 inch

  • Install Time: 4 Hours


Includes:



  • High-Modulus Brake Caliper Kit with Pads - Front (part number 4403401)

  • High-Modulus Brake Caliper Kit with Pads - Rear (part number 4403402)

  • 14 inch X 1.25 inch Vented and Slotted Rotors with 5x5 inch - Front (part number 4403455)

  • 14 inch X 1.25 inch Vented and Slotted Rotors with 5x5 inch- Rear (part number 4403456)

  • All necessary hardware


Delta Brake System Features:



  • Significantly improved braking performance over factory brake system

  • 100 percent bolt-on upgrade with basic hand tools

  • Balanced front to rear brakes tuned specifically for lifted vehicles

  • Brake bias and piston sizes optimized for JL and JK Wrangler/Unlimited and JT Gladiator models

  • Designed to work with stock proportioning valve and ABS

  • 3-year warranty


High-Modulus Brake Calipers Features:



  • Opposed 4-piston caliper design with 2 inch front pistons and 1.375 inch rear pistons

  • Same flow rate as factory 2-piston calipers - 4 pistons move each side half the distance instead of 2 pistons only moving one side the full distance

  • EPDM synthetic boot material keeps water and other contaminants away from piston

  • Hard-chrome coating on piston reduces friction to improve performance

  • 4-piece High-Modulus bridge caliper design combines heat-treated 4140 cast steel bridges with 6061-T6 forged aluminum piston housings

  • Steel bridges resist bending/flex better than standard aluminum or cast iron

  • Improved stiffness = consistent brake feel/modulation during brake application and release

  • Low-profile bridge accepts 14 inch diameter rotors behind 17 inch wheels

  • 1,000-hour salt spray tested zinc- and E-dipped coating on bridges and mounts

  • 300,000 psi steel formed hardware

  • Calipers feature built-in auto bleeding check ball, valve, and spring for easy bleeding

  • Hard-coat anodized, scratch-resistant piston bores


Brake Rotors Features:



  • Massive 14 inch x 1.25 inch vented rotors for superior stopping performance

  • Larger diameter rotors offer more mechanical advantage for more stopping power

  • Heat-treated, heavy cast-iron rotors offer better heat absorption

  • Mill-balanced, vented rotors for maximum heat dissipation

  • Included slotted rotors offer better gas dissipation than smooth rotors

  • Geomet coating on non-friction surfaces resists corrosion


Brake Pads Features:



  • Proprietary composite-resin, semi-metallic pads provide excellent full temperature stopping power for maximum initial speed scrub with increased pad life and reduced noise and dust

  • Drop-in pad design - no need to disassemble calipers to replace pads

  • Stock Brake Rotor Reference:

  • JL Sahara/Rubicon front: 12.9 inch x 1.1 inch (330mm x 28mm) vented rotors

  • JL Sahara/Rubicon rear: 13.4 inch x 0.55 inch (342mm x 14mm) solid rotors

  • JL Sport front: 12.9 inch x 0.94 inch (330mm x 24mm) vented rotors

  • JL Sport rear: 12.9 inch x 0.47 inch (328mm x 12mm) solid rotors

  • JK front and rear: 11.9 inch x 1.1 inch (302mm x 28mm) vented rotors (U.S.-spec)


Notes:



  • Requires a minimum wheel diameter of 17 inch.

  • On JK models, we recommend upgrading the stock master cylinder and brake booster to the Mopar Master Cylinder and Brake Booster Kit (part number P5160050).

Please contact us if you wish to learn more about the warranty for this product.

Please contact us if you wish to learn more about the warranty for this product.

Please contact us if you wish to learn more about the warranty for this product.

Please contact us if you wish to learn more about the warranty for this product.

Please contact us if you wish to learn more about the warranty for this product.

Fitment:
Vehicle-specific
SKU:
4403450

No installation documents are available for this product. Please contact us if you require installation assistance.

No installation documents are available for this product. Please contact us if you require installation assistance.

No installation documents are available for this product. Please contact us if you require installation assistance.

No installation documents are available for this product. Please contact us if you require installation assistance.

No installation documents are available for this product. Please contact us if you require installation assistance.

Review Description and More Details for additional fitment specifications such as Engine, Cab Length and Bed Length (if applicable).

Related Products

Related Products