Toytec Aluma Series Boss 2.0 Suspension Kit w/ UCA and Bump Stops: 07-21 Tundra (2-3 in. Lift) - TTBOSS207-ALM-3

Toytec Aluma Series Boss 2.0 Suspension Kit w/ UCA and Bump Stops: 07-21 Tundra (2-3" Lift)

***This configuration is for use exclusively with aftermarket upper control arms to accommodate between 2" to 3" of lift***

Kit Part Number: TTBOSS207-ALM-3

Kit Includes

• Front 2.0 Aluma Series Boss IFP Coilovers, 2"-3" Lift (LK207TUN-P)


• Front Differential Drop Kit (RM83012)


• Rear 2.0 Aluma Series IFP Shocks (LK207R-P)


• Rear 1" Block Kit w/ U-Bolts (BK-1)


• DuroBumps Front Bump Stops (DBF2T)


• DuroBumps Rear Bump Stops (DBR35TU)


• Tuff Country Upper Control Arm Kit, Standard Ball Joint (50936)

Toytec Front 2.0 Aluma Series Boss IFP Coilovers: The shock bodies are made from hard anodized aluminum for cooler operation as well as better protection from the elements. Adjustable from 2-3" of lift. Internal hydraulic valving optimized to match the 700 lb. rate spring for use with or without a bumper or winch. Coilovers are assembled and ready to bolt on. No spring compressor or special tools needed for installation. Nitrogen charged design with internal floating piston to help prevent shock fading and cavitation. Heavy duty 16mm induction-hardened piston shaft. These shocks are fully rebuildable. Coilovers are sold as a pair.

Front Differential Drop Kit: Recommended for all lifted 4x4s.

Front Durobumps Bump Stops: DuroBumps bump stops for the 2nd and 3rd Gen Tundra are proudly made in the USA with heavy-duty dual durometer rubber to provide a smoother progressive dampening -- greatly reducing hard bottom outs. Gain better off road control and comfort vs harsh-on-contact OEM bump stops. Upgrade your truck to 100% eliminate that damaging shell-shock effect from hitting those larger bumps.

Rear Durobumps Bump Stops: DuroBumps bump stops for the 1st Gen Tundra are proudly made in the USA with heavy-duty dual durometer rubber to provide a smoother progressive dampening -- greatly reducing hard bottom outs. Gain better off road control and comfort vs harsh-on-contact OEM bump stops. Upgrade your truck to 100% eliminate that damaging shell-shock effect from hitting those larger bumps.

Toytec Rear 2.0 Aluma Series IFP Shocks: For 1-3" lift. Shock bodies are hard-anodized aluminum for cooler operation and longer lasting in the elements. Fully rebuildable. Perfect match to the 2.0 Aluma Coilovers.

Toytec Rear 1" Block Kit w/ U-Bolts: Solid T6 Aluminum blocks with pressed in steel pin. Includes new u-bolts w/hardware, and two blocks. 1" lift block kit works with add-a-leafs and/or shackles for an additional 1" rear lift.

Tuff Country Upper Control Arms Kit: Standard Ball Joint. Maximize your wheel travel and increase your strength while also correcting alignment angles.