FVC Sprinter Van Bull Bar for 19-26 Sprinter 1500/2500/3500 - SP1153B

FVC Sprinter Van Bull Bar for 19-26 Sprinter 1500/2500/3500 - SP1153B

The Sprinter Bull Bar adds an aggressive, purposeful look to your van's front end while delivering real off-road functionality. It adds front-end style while opening up serious auxiliary lighting options, there's no cutting or drilling required for installation, and it pairs directly with our Sprinter Skid Plate for complete front-end coverage.

Built from 2.5 in. aluminum tubing, the Sprinter Bull Bar works with our Sprinter Skid Plate (available in 4WD and AWD versions) to protect critical engine components from underbody damage. For lighting, the Bull Bar has three separate lighting zones: lower mounts sized for a pair of Baja Designs S2 Light Pods, a 4 mm bracket that can accommodate round lights up to 6 in. in diameter (note: drilling is required to mount lights in this location), and the upper tubing can mount lights using 2.5 in. clamps. Whether you're running a simple fog light setup or a full lighting array, the flexibility is built in.

Installation takes about 30 minutes with no cutting or drilling required, meaning no permanent modifications to the front end. The Bull Bar bolts directly to the stock over-run brackets, or to our Sprinter Frame Rail Support Brackets for 3500 dually vans where those brackets are commonly missing. Sensors and cameras are left completely unobstructed, and no permanent modifications are required. Standalone or paired with the Skid Plate, it's everything you need for a capable, clean front-end setup.

• Bolt-on, No Compromises: A serious front-end upgrade without any permanent modifications. The Bull Bar installs in about 30 minutes and leaves your van exactly as it was if you ever take it off.
• Better Together: The Bull Bar and Skid Plate are designed to work as a system, covering your lighting needs up front and protecting critical engine components underneath.
• Built For Lighting: Three separate mounting zones let you run anything from a simple fog light setup to a fully loaded auxiliary lighting build. No extra fabrication needed, no guesswork, just three ready-to-use mounting zones.

Details

• Bolt-on install, no cutting or drilling required
• Three dedicated zones for lighting
• Maintains full function of sensors and cameras
• Standalone upgrade or pairs with the Sprinter Skid Plate
• Top tube mounts lights of your choosing with 2.5 in. clamps
• Middle 4mm bracket for mounting lights up to 6 in. diameter
• Lower section compatible with Baja Designs S2 SAE or S2 Sport Light Pods
• 2.5 in. aluminum tubing construction
• Exterior-grade UV-resistant powder coat finish

Compatibility

• 2019+ Mercedes-Benz Sprinter Vans (4WD and AWD)
• 3500 Models will need over-run brackets (not stock on 3500), or our Sprinter Frame Rail Support Brackets