ICON 2WD, 1.25-3" Lift, Front, 2.5 Series Coilover Kit, Remote Reservoir w/ CDXS for '25 4Runner - 58796X

ICON 2WD, 1.25-3" Lift, Front, 2.5 Series Coilover Kit, Remote Reservoir w/ CDXS for '25 4Runner - 58796X

ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir CDXS front coilover shocks are an incredible upgrade for the front end of the 2025-2026 Toyota 4Runner 2WD. These adjustable coilovers allow up 1.25-3 in. of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific valving, their large 2.5 in. shock body with increased piston surface area over stock components, and their optimized extended length taylored specifically for 2WD models, yield the maximum travel possible along with superior ride quality and suspension performance both on-road and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Dual Speed (CDXS) valves are included for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness. When paired with 2.5 Aluminum Series CDXS rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your 6th Gen Toyota 4Runner.

Features

• Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
• Vehicle specific shock length optimized for 2WD models yields maximum front wheel travel
• Height-adjustable coilovers offer 1.25-3 in. of lift height adjustment over stock
• 2.5 in. diameter shock bodies with remote reservoirs offer increased heat capacity and improved cooling for consistent performance
• ICON CDXS equipped for independent adjustability of high speed and low speed compression force for handling response and aggressiveness
• ICON engineered coil springs
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated shock bodies with 7/8 in. diameter shafts
• FK rod end bearings for extended longevity and minimal deflection
• Fully rebuildable and re-tunable

Technical Notes

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: 17 x 8.5 in. with 6.32 in. Backspace / 40mm Offset
• Recommended Aftermarket Wheels: ICON Alloys - 18 x 9 in. with 6.6 in. Backspace / 40mm Offset
• Recommended Aftermarket Tires: 33 x 11.50 in. (Larger tires may fit but fender trimming and modifications will be required.)
• Application Note #4: Advertised lift heights based on models equipped with gasoline engine
• Application Note #85: Advertised Lift Height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
• Application Note #150: Shocks are fully serviceable
• Application Note #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles
• Application Note #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
• Application Note #202: ICON Delta Joint Pro front upper control arms are recommended to maintain proper wheel alignment above 2 in. of lift
• Application Note #232: Only fits 2WD models. Installation onto 4WD models will result in damage to front axles.

Specifications

• Brand: ICON Vehicle Dynamics
• UPC: 840103435640
• Proxy Number: 58796
• Shipping Width: 13 in.
• Shipping Length: 31 in.
• Shipping Depth: 7 in.
• Shipping Weight: 58 lbs.