Synergy JK G9 Track Bar Hardware Kit Complete UCA LCA 07-18 Wrangler JK/JKU - 8050-02

Synergy Jeep JK Complete Upper Control Arm - Lower Control Arm - Track Bar Hardware Kit
Details:

• Fits 07-18 Jeep Wrangler JK and Jeep Wrangler Unlimited JK


• High strength G9 hardware


• Replaces the Lower Control Arm (LCA) Upper Control Arm (UCA) hardware and specialized nut tabs that get destroyed from wheeling abuse


• Replaces the Rear Track Bar (TB) bolts which often get worn out from service


• Replaces the Front Track Bar Frame Side (TB) bolt on 2012+ JK with a 14mm Grade 10.9 bolt


• Includes hardened extra thick washers that will not deform or contort like Standard washers

Complete Kit Includes Lower Control Arm Track Bar Hardware Kit 8050

• 8 Each 9/16-18 UNFX4.0 inch long G9 bolts (LCAs)


• 4 Each 9/16-18 UNFX3.0 inch long G9 bolts (TBs)


• 12 Each 9/16-18 UNF G9 Stover top lock nuts


• 24 Each 9/16 inch Extra Thick G9 hardened flat washers


• 1 Each M14-2.0X80mm Grade 10.9 bolt (2012+ Front Frame Side Track Bar Bracket)


• 1 Each M14-2.0 GG9 Stover top lock nut

and Upper Control Arm Hardware Kit 8050-01

• 4 Each 9/16-18 UNFX3.50 inch long G9 bolts (RUCAs)


• 4 Each M12X1.50 85MM (3.50 inch) long GR10.9 bolts (FUCAs)


• 4 Each M12X1.50 G9 Stover top lock nuts


• 4 Each 9/16 inch Extra Thick G9 hardened flat washers


• 8 Each 1/2 inch Extra Thick G9 hardened flat washers


• 2 Each Rear Upper Control Arm Nut Tab, Frame Side


• 2 Each Rear Upper Control Arm Nut Tab, Axle Side