Turn Offroad Hard Top Tent for 21-26 Bronco 4-Door, 22-26 Bronco Raptor

Turn Offroad Hard Top Tent for 21-26 Bronco 4-Door & 22-26 Bronco Raptor

Keep your Bronco camping setup low and practical for daily driving, trail access, and overnight trips. The Turn Offroad Hard Top Tent fits 2021-2026 Ford Bronco 4-Door models and 2022-2026 Bronco Raptor models, replacing either the factory hard top or factory soft top with one complete roof and tent system. When closed, it adds only about 0.5 in. of height, helping preserve the Bronco's everyday clearance without giving up an integrated sleeping platform.

• Keep nearly all of your factory roof clearance with a compact closed profile that adds only about 0.5 in. of height, helping your Bronco remain practical around garages, parking structures, covered parking, and tight trail access.
• Simplify your camping setup with an integrated hard top tent that combines the replacement roof, tent assembly, mattress, and sleeping platform into one system instead of requiring a separate rack-mounted rooftop tent.
• Carry awnings and accessories more cleanly with standard L-track mounting rails on both sides for compatible camp gear, awnings, and accessory mounts.
• Stay better protected through changing trail and campsite weather with 10,000 mm dynamic waterproofing, 3,000 mm pressure-resistant waterproofing, and a Grade 7 wind rating.
• Reduce installation work and permanent modification with a bolt-on design that uses the Bronco's existing mounting points, requires no drilling, and is designed for an approximately 20-minute installation.

The Hard Top Tent is built in house using fiberglass construction and is designed as a complete replacement roof system for the 4-door Bronco. Each kit includes the hard top tent assembly, mattress, rear glass, side glass, seals, hardware, L-track mounting systems, and required installation components. Bronco Raptor models require removal of the factory front cage brace for installation.

A Hard Top That's Ready To Camp

• Integrated With The Hard Top: Designed as an upgrade option for Turn Offroad hard tops.
• Warm, Off The Ground, Away From Bugs: A more comfortable place to wind down when the trail day is over.
• More To Come: Power and lighting accessories are planned to make camp even easier.

Built For The Trip, Not Just The Campsite

Keep the capability and clean look of a Turn Offroad hard top, then open up camp when you're ready to call it a night.

Features

• Keep your Bronco close to its factory height with a low-profile closed design that adds only about 0.5 in. of overall height.
• Camp without adding a separate roof rack and rooftop tent with an integrated hard top and sleeping system that replaces the factory hard top or soft top.
• Mount awnings and trail accessories with less added hardware using standard L-track mounting rails built into both sides of the hard top.
• Stay better protected when weather changes with 10,000 mm dynamic waterproofing, 3,000 mm pressure-resistant waterproofing, and a Grade 7 wind rating.
• Get your Bronco converted and ready to use faster with a bolt-on design that requires no drilling and is designed for an approximately 20-minute installation.

-----------------------------------------------------

FAQ

• What are the mattress dimensions? The mattress measures 85 x 50 inches and is 1.25 inches thick.
• How many people can sleep in the tent, and what is the platform's weight capacity? The sleeping platform accommodates two adults and has a 550 lbs. static weight capacity.
• Can bedding stay inside when the tent is closed? Items that compress well can remain inside when the tent is closed, provided they are spread evenly. Sleeping bags and non-memory-foam pillows work well.
• How long does setup and takedown take? Setup takes just seconds, and takedown takes about one minute.
• How does the tent ventilate? The windows are designed to vent at the top. There are also two closable ports for A/C or a diesel heater. You can adjust ventilation by opening the zippers more or less.
• Is a ladder included, and how do you get into the tent? No ladder is included. Access is from inside the vehicle through two trap doors in the roof.
• How much does the complete Hard Top Tent weigh? The complete installed system weighs approximately 225 lbs. The OEM top weighs about 145 lbs.
• How much weight can the exterior L-track carry? Each exterior L-track is rated for 50 lbs. per side. Yes, an awning can remain installed while the tent is open. We are working on awning mounts now.
• Are there special driving restrictions with the tent closed? There are no additional highway-speed, off-road-speed, or trail-use restrictions with the tent closed.
• Does the roof open for open-air driving? The Hard Top Tent converts the vehicle to a removable, one-piece roof. You can remove the entire roof to drive topless, but you cannot open a portion of it for open-air driving while the tent is installed.
• Does the advertised installation time include removing my factory top? The installation estimate does not include removal of the OEM top. We recommend three to four people to lift the Hard Top Tent onto the vehicle. An installation video will be available shortly.
• Does this hard top reduce wind noise vs a soft top? Yes, most customers notice a big improvement in: wind noise reduction, temperature insulation (hot/cold), overall cabin comfort
• Does it affect MPG? MPG changes depend heavily on your overall setup (tire size, lift, racks, rooftop gear). The hard top itself typically is not the biggest factor, but adding racks/cargo can impact MPG.
• What does the Grade 7 wind rating mean? Grade 7 represents sustained winds of 32-38 mph, with estimated gusts of 40-48 mph. The tent has been simulated at these speeds and above.
• What does the lifetime warranty cover? The warranty covers defects in any of the materials listed in the question. All wear items will be available for replacement. We generally send replacement items at no charge or at cost plus shipping.