ICON 4WD, 0-2" Lift, Rear, VS 2.5 Aluminum Series Shock Absorbers, Piggyback Reservoir w/ CDEV (Pair) for 21-25 F-150 - 97721EP

ICON 4WD, 0-2" Lift, Rear, VS 2.5 Aluminum Series Shock Absorbers, Piggyback Reservoir w/ CDEV (Pair) for 21-25 F-150 - 97721EP

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDCV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV's hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.

Features

• ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
• ICON's internal "Bump Zone" increases damping by 20% to provide more control as the shock approaches full compression
• Nitrogen charged monotube design with piggyback reservoir
• Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on-road and off-road
• 7/8 in. diameter induction hardened, chrome plated shock shaft
• One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
• PTFE lined spherical bearings and application specific mounting hardware
• 6061 aircraft grade aluminum CNC machined components
• 100% Rebuildable
• 100% Revalveable

Technical Notes

• Application Note #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
• Application Note #129: Will not work with factory installed electronically controlled suspension.
• Application Note #198: An iOS operated device is required to run ICON Intelligent Control app
• Application Note #204: Also requires installation of applicable IIC kit and CDEV front shocks
• Application Note #235: Will not fit F-150 Raptor
• Tech Note: Compatible with 0-2 in. of rear lift over stock on most 2021-2025 F-150 4WD models
• Tech Note: An iOS operated device is required to run ICON Intelligent Control App

Specifications

• Brand: ICON Vehicle Dynamics
• UPC: 840103425719
• Proxy Number: 97721
• Shipping Width: 15 in.
• Shipping Length: 39 in.
• Shipping Depth: 9 in.
• Shipping Weight: 30 lbs.