Geiser Gen 3 Raptor Progressive Springs

Gen 3 Raptor Progressive Springs

These custom progressive rate springs are designed for the 2021+ Gen 3 Ford Raptor F-150. Select from individual sets or as a full 4 spring set.

The FRONT Progressive Springs will give you about +2.5" lift in the front giving you a leveled look with stock rears. They are going to be a stiffer ride than stock and 10% stronger.

The REAR Progressive Springs will give you about +1.5" lift in the rear, giving you a slight raked look when paired with our front springs. They are going to be a stiffer ride than stock and 10% stronger.

Tested with 700 lbs. in bed and only lost about an 1". These springs will work with the live valve suspension. Each time the truck starts the computer resets and will adjust. They will accommodate up to a 37" tire. Inner fender trimming may be required depending on your tires and offset. Simply change the spring and you are ready to roll. Wall mounted spring compressor recommended.

PHOTO NOTE: Gen 3 photos show truck running 37x13.5" YOKOHAMA GEOLANDERS with 20x10" VOSSEN HF6-4 offset -18 and +2.5" front springs, +1.5" rear springs.

Details

• Front Springs Lift: 2.5"


• Rear Springs Lift: 1.5"


• Powder Coat Gloss Silver Finish


• Provides a level look for the Raptor


• Accommodates most 37" tires


• Inner fender trimming may be required


• Wall mounted spring compressor required


• No spacers required

Why Choose Progressive Springs

They are an ideal compromise between a spring stiff enough to do the work duty required and one soft enough to suck up the bumps of a rough road.

Progressive springs have unequal distance between each coil throughout the length of the spring. The spring rate will change progressively with the compression of the spring. This allows a single spring to have different spring rates.